#2 Hunter Osprey with 1/2" shank and un-handle - The #2 tool uses the # 2 Hunter Cutter and is fabricated on a 1/2" round shank

#3 Hunter Hercules Turning Tool with 5/8" shank and Un-handle. A robust and hard working tool with a soft touch for both heavy-duty and delicate wo...

#3 Hunter Turning Tool with 3/8" shank and Un-handle - The #3 tool uses the # 3 Hunter Cutter and is fabricated on a 3/8" round shank

#3 Hunter Turning Tool with 3/8" shank and wood handle   - The #3 tool uses the # 3 Hunter Cutter

This 1/2” diameter tool is the first choice for turning bowls. Use the same tool for rough turning as well as finishing turning. This is an efficie...

The # 5 Full Swan Neck is a larger version of the # 3 tool, measuring about 10" long and with a shaft width of 5/8". This tool is especially useful...

This # 5 tool was designed for the box makers and turner in mind, who like to work on smaller but deep vessels.  The # 5 features a 5/8 shank taper...

This # 5 tool was designed for the box makers and turner in mind, who like to work on smaller but deep vessels.  The # 5 features a 5/8 shank taper...

#1 Hunter Osprey with 3/8" shank, woo#1 Hunter Osprey with 3/8" shank, wood handled handle   Uses #1 Cutter

#1 Hunter Osprey with 3/8" shank, woo#1 Hunter Osprey with 3/8" shank, un-handled.

  The V shape Bowl gouges is a balance between flute shape and depth to prevent clogging. These tools are actually a parabolic shape being they...

Jimmy Clewes Mega Mate #2 New ! Mega mate I have been asked by many turners to produce a Tool like the Mate #1 and #2 but one which has the stabil...

Jimmy Clewes Hollowing & Cutting Tools Mate # 1 and Mate # 2 Designed and Manufactured by Jimmy Clewes the Mate 1 & 2 come with a superior...

New Jimmy Clewes Hollowing & Cutting Tools Mate # 1 and Mate # 2 Designed and Manufactured by Jimmy Clewes the Mate 1 & 2 come with a supe...

  This 3/4" Box Scraper has Jimmy's proprietary grind.  He has found this to work best on the bottom of the boxes when transitioning between the...

  Jimmy Clewes Quick Releases are designed so that with a 1/4 turn you can insert or remove your tool from the handle. With these quick releases ...

  Jimmy Clewes Handle adapters are designed so you can turn your own handle and hold any square/rectangle tanged tool in that size. The current pr...

3/8" Bowl Gouge This flute was designed in conjunction with Canadian wood turner Jason Marlowe. It has a proportionately tight flute which is extr...

3/8" Bowl Gouge This flute was designed in conjunction with Canadian wood turner Jason Marlowe. It has a proportionately tight flute which is extr...

5/8" Bowl Gouge This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cuts ...

5/8" Bowl Gouge This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cut...

Our heavy duty steel handles are covered in thick plastic for an extremely confortable feel. Two set screws clamp the tool rigidly in place. Our ha...

 3/4" Tool Handle Adaptor

Thompson Lathe Tools 1/8" Parting Tool fits in a 1/2" Handle, Adapter or Quick Release.

 HANDLES These are the new handles. Features include: - Made from 6061 Anodized Aluminum. - Hollow tube allows tool length to be adjusted or revers...

HANDLES These are the new handles. Features include: - Made from 6061 Anodized Aluminum. - Hollow tube allows tool length to be adjusted or reverse...

 HANDLES These are the new handles. Features include: - Made from 6061 Anodized Aluminum. - Hollow tube allows tool length to be adjusted or revers...

 HANDLES These are the new handles. Features include: - Made from 6061 Anodized Aluminum. - Hollow tube allows tool length to be adjusted or revers...

HANDLES These are the new handles. Features include: - Made from 6061 Anodized Aluminum. - Hollow tube allows tool length to be adjusted or reverse...

 DETAIL GOUGESThe 3/8 detail gouge has a flute depth of 33% of the diameter with a nice radius to cut beads or coves. This tool does everything wel...

 1-14 Spindle Roughing Gouge This is one Heavy Duty Tool

This is a solid bar 5/8" Roughing Gouge. It is designed to withstand rigorous use. You will not be disappointed. As with all of Doug's tools they a...

SCRAPERS Made from 5/16 thick stock, all have a 6 inch blade length. The 1/2, 3/4  & Monster tools have a 3/8 wide tang and the 1", 1-1/4 , 1 3...

SKEWS Skews are made from 5/16 thick stock, all have a 6 inch blade length with a 30 degree front angle. The 1/2, 3/4 tools will fit a 1/2 nose o...

SPINDLE GOUGES The spindle gouge has a flute depth of 50% of the stock diameter. This is a good all around spindle tool that is easy to control.   ...

  U-SHAPE BOWL GOUGESThe U shape bowl gouge is an excellent all around tool. It has a full radius that will provide a beautiful shearing cut insid...

  The V shape Bowl gouge is a balance between flute shape and depth to prevent clogging. A fingernail grind is provided that works well on a roughi...

  Thompson Lathe Tools Handle Adapters are designed so that with the use of an Allen wrench you can insert or remove your un-handled tool from the...